Permit Requirements for Lomira, Wisconsin
For HVAC projects in Lomira, determining the correct permitting authority depends on whether the project site is located within the incorporated city limits or in an unincorporated area of Dodge County.
Authority Having Jurisdiction (AHJ)
Most jurisdictions require permits for HVAC work to ensure safety and code compliance. The governing body responsible for issuing these permits varies by specific location:
General HVAC Guidelines
Permits are usually required for new installations, structural modifications, or major repairs. While minor maintenance or cosmetic updates may be exempt, landowners should always verify local codes before work begins.
Help Us Improve This Guide
If you have found a direct link to a permit portal or a specific local ordinance for HVAC in this area, please submit an update.
Because Lomira is located within Dodge County, the following broader county regulations may also apply to your project:
Wisconsin, Dodge County Hvac Permit Regulations and County Ordinances for Unincorporated Areas
HVAC Permit Requirements in Dodge County, Wisconsin
Dodge County does not have a centralized, county-wide building and safety division that manages HVAC permits for all properties. Instead, building regulation and the issuance of HVAC permits are typically handled at the local municipal level (such as by individual towns, villages, or cities). Because requirements vary significantly depending on the specific municipality where the property is located, there is no single county-wide rule for HVAC permits.
Rules for Properties in Unincorporated Areas
For properties located in unincorporated areas of Dodge County, you must contact the specific town government or their designated building inspector to determine if an HVAC permit is required for your project. While Dodge County’s Land Resources and Parks Department oversees zoning, land use, and certain specific permits (like conditional use or sanitary permits), it generally does not issue building or mechanical/HVAC permits for residential or commercial structures. These are managed by local town officials or contracted building inspectors. It is the property owner's responsibility to verify the specific ordinances and permit requirements of their town before beginning any HVAC work, as failure to obtain a required permit can result in penalties or fines.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within Wisconsin:
Wisconsin Hvac Legislation, Codes, and Guidelines
State Statutes and Codes Adopted
Wisconsin utilizes a hybrid approach to building codes, maintaining its own administrative code chapters that incorporate and amend national model codes. As of October 1, 2025, Wisconsin transitioned to the 2021 editions of the International Code Council (ICC) suite for commercial and multi-family residential buildings, with specific state-level amendments known as "Wisconsinisms."
- Commercial and Multi-Family Buildings: These are governed by the Wisconsin Commercial Building Code, found in Chapters SPS 361–366 of the Wisconsin Administrative Code. Chapter SPS 364 specifically addresses heating, ventilating, and air conditioning (HVAC) systems by adopting the International Mechanical Code (IMC) with Wisconsin-specific modifications.
- One- and Two-Family Dwellings: These are regulated under the Wisconsin Uniform Dwelling Code (UDC), found in Chapters SPS 320–325. HVAC requirements for these dwellings are specifically detailed in Chapter SPS 323.
Primary State Agencies
The primary agency responsible for the development, adoption, and oversight of building, fire safety, and energy efficiency codes in Wisconsin is the Department of Safety and Professional Services (DSPS). Within the DSPS, the Division of Industry Services (DIS) manages the programs for commercial buildings and one- and two-family dwellings, coordinating with local certified municipalities that handle plan reviews and inspections.
Resources to Learn More